In our Astech ready mix concrete plant, all the feeder bins are provided with gates that operate pneumatically. All the four bins combined have a storage capacity of 7.5 m³.

The gates are radial type for coarse/ fine discharge.

Sand bin is also provided with discharge.

Aggregate from the gathering is transferred to the conveyor belt into the retention hopper.

In Astech Industries Concrete Batch Plant, aggregates from the feeder are discharged into gathering conveyor which is suspended on 6 load cells.

The gathering conveyor discharges the mix on to the slinger conveyor as soon as the desired recipe accumulates.

Both the gathering conveyor and slinger conveyor are provided with idler rollers and return rollers.

The material enters into the weighing hopper which is mounted on 3 load cells and is provided with butterfly valve for discharge. In the concrete mix plant, cement weighing hopper of capacity 500 kg is provided with pneumatic vibrator and two inlets for two screw conveyors.

The water tank is supported on load cells and it has gate with rubber gasket at the bottom.

Additives comprise of admixture flask of capacity 10 liters with feeding pump.

The required quantity of cement is fed from SILO to the cement weighing hopper.

A storage hopper for temporary storage of aggregates is provided, this is equipped with a vibrator and it is utilized for holding the batch of 4 aggregates before feeding into the mixture.

Pan type mixing unit or Pug Mill Type dual shaft mixer is the main component of the Concrete Batch Mix Plant. These dual shaft mixers or Pan typed concrete mixtures manufactured by ASTECH ensure proper mixing and maximum output.

Our Pan Type Mixture comes in capacity of 0.75 m³ and is fixed on the basic structure of the plant. Mixer has a total of 7 arms and its shell is reinforced with replaceable high wear resistance NI hard liners. The aggregates, cement, water ad additives are discharged to the Pan Mixer for homogenous mixing.

It is only after proper and homogenous mixing the batch is ready to be discharged by hydraulic system located beneath the pan mixer.

Fully computerized cabin with or without SCADA based controller can be supplied with concrete batching plants manufactured by ASTECH.

The software used is very user friendly and ensures top notch performance.

Also available is a proxy switch for each control panel. There is a complete display of the entire process of control parameters. There is also provision for printing entire data like-Mix Proportion, Batch Weigh, Total No. of Batches, Sub Total, Gross Total, etc.

Preset batch controls the number of batches for Transit Mixer.

Also available Auto and manual control with the batch mix plants.